Drivers 3081 Published by

AMD released Radeon Software for Linux 26.17 on November 18, a proprietary driver update aimed at enterprise Linux desktops and workstations. The standout addition is high-bandwidth HDMI support, bringing FRL, FreeSync, VRR, 8K modes, and HDR/SDR switching to distros stuck on older kernels. It also contains AMD's first explicit GDDR7 memory reporting, a quiet signal that RDNA 5 is being software-enabled ahead of hardware. Installers target Ubuntu 24.04.5 HWE, Ubuntu 26.04.1, RHEL 10.3, and RHEL 9.9.





AMD's latest Radeon Linux driver adds HDMI 2.1 features and quietly flags GDDR7

AMD launched Radeon Software for Linux 26.17 on November 18, and though it's a routine point update to its proprietary driver line, it's quietly doing two things that matter. It delivers a long-waited batch of HDMI 2.1 display features for enterprise Linux, and it contains the first explicit signal that AMD is prepping GDDR7 memory for its next-generation RDNA 5 GPUs.

This is AMD's vendor-installed driver, aimed at enterprise desktops and workstations where stability matters more than new features. It's separate from the open-source AMDGPU kernel driver that ships inside the Linux kernel itself, which is what most consumer Linux users actually run. The release notes are direct about the distinction. For many setups, AMD says you're better off with your distro's own drivers, and it specifically names Fedora, Pop!_OS, Linux Mint, and Arch Linux as places where you should just stick with what your distro ships.

It's a bit of a head-scratcher that AMD still maintains a separate proprietary Linux stack in 2026, but there are real reasons for it. Enterprise customers on certified OSes need a supported driver combination, and some recent GPUs outpace what distros have packaged up yet.

Amd_radeon

Display stack gets the full treatment

The headline change is high-bandwidth HDMI support, which is really the user-facing half of work that's been creeping upstream in the kernel driver for years. HDMI 2.1 support in the AMDGPU driver was long blocked by the HDMI Forum, and once that obstruction lifted (widely speculated to involve Valve's involvement), patches started landing fast.

Linux 7.2 brought FRL but kept it disabled until VRR was ready. Linux 7.4 then flipped on FreeSync, VRR, ALLM, and FRL all at once. FRL repurposes the HDMI clock lane as a data lane, raising the bandwidth ceiling enough to fit 4K at 120 Hz over HDMI. The older TMDS transport simply couldn't handle that. VRR and FreeSync match refresh to frame timing to cut tearing and stutter, and ALLM tells a compatible TV to switch into low-latency game mode on its own.

26.17 bundles those same capabilities for enterprise distros still on older kernels. The payoff lands hardest for living-room PCs hooked to 4K TVs, where HDMI is usually the only high-refresh option around. The installer also handles audio over those links, 8K modes a display lists in its EDID, the limited versus full YCbCr color range televisions expect, and switching between HDR and SDR on the fly.

Keep in mind that default FRL enablement doesn't guarantee every card will actually push 4K at 120 Hz. It still depends on GPU generation, the TV's HDMI 2.1 implementation, and whether your cable can keep up.

There's a fair bit more under the hood too. Lower idle display power, a hardware cursor that gets its own plane instead of being composited in software, extra video overlay planes for multi-monitor work, and video scaling plus color conversion offloaded to dedicated display silicon. These are hallmarks of AMD's next-gen Display Core Next 6 (DCN 6) engine, tracking the same DCN 6 work landing in the mainline kernel ahead of RDNA 5. They help desktop smoothness and video efficiency more than they change anything dramatic.

A GDDR7 signal for RDNA 5

The other tell is the GDDR7 memory reporting that 26.17 folds into the driver, AMD's first explicit enablement of the newer standard in its Linux stack.

The current RX 9000 series (RDNA 4) deliberately sticks with GDDR6, a call AMD reportedly made to hold prices down during the ongoing VRAM crunch. It's worked out well enough against Nvidia's GDDR7-powered RTX 50-series that there's been little pressure to change course. A switch to GDDR7 lifts the ceiling substantially, though. GDDR6 tops out around 20 Gb/s, which is roughly where the RX 9070 XT sits at 640 GB/s. GDDR7 at 36 Gb/s could push memory bandwidth toward roughly 1,152 GB/s on comparable parts.

This is reporting and enablement, not a product launch. AMD hasn't named an architecture or confirmed a single retail card. Treat it as solid evidence that RDNA 5 is being software-enabled ahead of hardware, following AMD's usual habit of upstreaming driver support long before a launch. Upstream patches for the IH 8.0 interrupt handler, NBIF 7.10 bus interface, DCN 6 display engine, and GFX 13.0.x graphics engine line up nicely with that theory.

Two small things round out the release. The fan "stop temperature" feature rolls out to additional RX 9060 and RX 9070 parts, so the fan stays put until the GPU actually crosses that threshold. That's the zero-RPM idle trick: silent operation under light loads, spinning up only when it needs to. Upstream it's exposed through the sysfs file fan_zero_rpm_stop_temperature in the amdgpu thermal API, where it already existed on RDNA 3 parts. Rolling it onto these RDNA 4 cards just closes out feature parity.

The RX 9060 is an OEM-only Navi 44 part with no standalone retail launch or public MSRP. The RX 9070, meanwhile, is a full Navi 48 part that launched at $549 beside Nvidia's RTX 5070.

The release also tracks Red Hat's freshly shipped RHEL 10.3 and 9.9, which arrived around November 11. Those builds bring sealed images for image-mode deployments, an MCP server for production diagnostics, AI troubleshooting tools, and kernel 6.12 with GCC 16 in RHEL 10.3. AMD keeps its proprietary stack in lockstep with certified OSes because supported-driver combinations matter more than fresh features in a data center. There's a fix for the AMD SMI energy counter on RX 7000 Series cards too, correcting inaccurate cumulative energy readings from amdsmi. It matters for power monitoring and workload accounting, if not much else that's flashy.

26.17 installers target four 64-bit systems: Ubuntu 24.04.5 HWE, Ubuntu 26.04.1, RHEL 10.3, and RHEL 9.9. The full compatibility matrix spans the RX 9000, 7000, 6000, 5000, Vega, 500, and 400 families, plus the Radeon PRO W7000, W6000, W5000, and WX lines.

One cosmetic wrinkle worth flagging. On AMD's download page, the entry labeled "26.17 for RHEL 10.3" still carries an older "Revision Number 26.16" tag. The release notes clearly identify this as the 26.17 build dated November 18, so read that revision label as a site glitch.

Head here to the release notes.