Untitled thread

I am trying to burn a cd and I've got this message: I really did not understand what happened. After 5 cd losted I gave up to burn. Can you help me? Best regards. System - K3b Version:0. 11. 14 KDE Version: 3.

Linux Customization Tweaking 106 This topic was started by ,



data/avatar/default/avatar35.webp

1 Posts
Location -
Joined 2006-02-07
I am trying to burn a cd and I've got this message:
I really did not understand what happened. After 5 cd losted I gave up to burn.
Can you help me?
Best regards.
"
System
-----------------------
K3b Version:0.11.14
KDE Version: 3.5.0-4.2.el4.kde
QT Version: 3.3.5
 
cdrecord
-----------------------
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright :copyright: 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'CD-RW GCE-8523B '
Revision : '1.00'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Profile: 0x0002 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1951488 = 1905 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 668 MB
Total size: 767 MB (76:04.92) = 342369 sectors
Lout start: 768 MB (76:06/69) = 342369 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11524 (97:28/26)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 13
Manufacturer: Multi Media Masters & Machinary SA
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 17480
Speed set to 4233 KB/s
Starting to write CD/DVD at speed 24.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 668 MB written.
/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 01 74 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 28.143s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 761856 bytes
Writing time: 239.371s
Average write speed 34.6x.
Fixating...
/usr/bin/cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.025s timeout 200s
Fixating time: 34.034s
/usr/bin/cdrecord: Success. prevent/allow medium removal: scsi sendcmd: no error
CDB: 1E 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.039s timeout 200s
/usr/bin/cdrecord: Success. start/stop unit: scsi sendcmd: no error
CDB: 1B 00 00 00 02 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.039s timeout 200s
/usr/bin/cdrecord: Cannot eject media.
/usr/bin/cdrecord: fifo had 76 puts and 13 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 2 times full, min fill was 82%.
 
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=24 -dao driveropts=burnfree -eject -overburn -data -tsize=342369s -
 
mkisofs
-----------------------
342369
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
Using FPC_CROSSWIN32_2_0_1_0509000.RP;1 for Disco70/Windows/FreePascal/2.0.1/fpc_crosswin32-2.0.1-050923.src.rpm (fpc_crosswin32-2.0.1-050923.i386.rpm)
0.15% done, estimate finish Mon Feb 6 14:46:45 2006
0.30% done, estimate finish Mon Feb 6 14:18:03 2006
0.44% done, estimate finish Mon Feb 6 14:12:37 2006
0.59% done, estimate finish Mon Feb 6 14:07:00 2006
 
mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid BackUp Linux Disco70 -volset -appid K3B THE CD KREATOR VERSION 0.11.14 :copyright: 2003 SEBASTIAN TRUEG AND THE K3B TEAM -publisher Marcio Carneiro <Marcio@Marcio.eng.br> -preparer K3b - Versão 0.11.14 -sysid CentOS -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bzbz6Ib.tmp -rational-rock -hide-list /tmp/kde-root/k3buWsMIa.tmp -iso-level 2 -path-list /tmp/kde-root/k3bor6ubc.tmp /root/.kde/share/apps/k3b/temp/dummydir0/
"
 

Participate on our website and join the conversation

You have already an account on our website? Use the link below to login.
Login
Create a new user account. Registration is free and takes only a few seconds.
Register
This topic is archived. New comments cannot be posted and votes cannot be cast.

Responses to this topic



data/avatar/default/avatar10.webp

2895 Posts
Location -
Joined 2002-08-30
Some more information would help.
 
This is an internal cdrw device?
 
What version of Fedora are you using?
 
Is this the version of K3b that came with Fedora, or off their website?
 
What are you attempting to burn, an iso file? If so, are you trying to burn it as a data file or as an image file?
 
Is the media rated for the drive in terms of speed and large enough to hold the data that you are trying to burn, say an 800 mb cd-r disk?