Linux Hardware
Dapper Dan
Yeeehaaa! I just got my new 128 mb usb stick mounted and working! It's a Lexar JumpDrive I got on sale for 20 bucks at OfficeMax. I know this is probably not very interesting news for the rest of you, but I'm having a lot of fun with it, and just wanted to tell someone!.
Best Drivers and Support for Graphics Card ????
darwinmartin
Forgive me if this question has been answered already and point me in the right direction. I am getting ready to buy a new graphics card for a new pc I am building. I have searched high and low for something to tell me which graphics card has the most support for Linux.
FEDORA CORE 1 (kernel 2.4) & NFORCE2 CHIPSET
macawgumbo
I have been around the web and cannot find some simple easy to follow directions about how to get the drivers installed for my nforce2 chipset under Fedora Core 1. I have searched this forum and found something about minion.
Scanner Suggestions?
cosmosys
I've been looking into a scanner for my machine that I'm building and I would like some suggestions on any good scanners that you have been successful with under linux. .
Toshiba Iaptop Modem installation Problem on linux 9
xenoboy
Dear Experts, i have Toshiba laptop Pentium 4. i have installed linux 9. my modem is not working with linux 9. i have AMR modem. how can i installed the modem software. where could i download the software? plz help me xenoboy.
Hardware Firewall
Psion
I've got an old PC which I concidering making into a Hardware Firewall running poss Mandrake 9. 2 > The hardware spec is: CPU=233MHz AMD (socket 7) - I might have a 400MHz somewhere. . Mem=64Mb pc100 (Dimms) min Graph=16Mb Banshie 2 or NvNti 32Mb Sound=Soundblaster 32AW 10Gb HDD I might also dual install win98se ...
Fedora, Kernel 2.6, Nvidia driver install issues.
Tekchip
I installed Fedora with no problems. Installed the rpm version of kernel 2. 6 with no problems. Now I seem to be having some issues getting the Nvidia drivers installed. According to everthing I've looked up you have to patch the nvidia driver source before running a make install.
How to get nforce2 audio and networking to work
hollywoodb
nVidia has released drivers for the nforce2 motherboards, available at nvidia. com's driver download page. If you follow the instructions there you won't have a problem. However: The nvaudio driver can be a little buggy at times.
KM2M Combo-L, is it linux compatible?
funkybob
is the MSI KM2M Combo-L mother board compatible with red hat 9? I can't get any help from MSI. BoB.
How do I find module to load so I can install Fedora Core 1?
macawgumbo
I need to find a module that will load ethernet drivers for nforce2 chipset. I need it to be able to be loaded in order to install Fedora Core 1 over ftp. Any help would be greatly appreciated!! Biostar M7NCG PRO Athlon XP 2500 Barton Core 512mb PC2700 DDR (64mb allocated towards onboard graphics) Integrated Geforc ...
ltmodem on Fedora Core
QNX
Plz Help i have installed fedora dist. . all working fine. . i have downloaded and compiled (and made changes in src) after restart i have created ISP connection and added a modem. . . modem is dialing, but it can't establish connection, aftel 60 sec.
Sony PCV-RZ32G and SUSE 9.0 Professional
sh4dowf0rg3
I installed SUSE 9. 0 Pro on a Sony Vaio PCV-RZ32G. If I leave the computer alone for a couple minutes, the keyboard IO acts up like a key is stuck. For example, if I'm working in Ooo while typing something and leave to computer for a minute or two 'v's or other characters start to go across the document.
Can't get Connexant HCF modem to work. Mandrake 9.2.
duffboygrim
Hi there. Most of my LINUX stuff is going great. My only problem is that I can't get my Connexant (Yuk!) modem to work. Can anyone help? I'm new to LINUX so easy step by step instructions would be appreciated! Thanks, DBG.
Please recommend motherboard for new Linux bod
brjoon1021
Can you recommend a good motherboard, preferrably integrated graphics, audio, LAN that Linux likes. It can be Intel as well, I am not stuck on AMD based, though I would prefer it. Particularly an nforce2 based IGP board because of the Nvidia drivers for Linux.
IDE raid cards
Gaelen
I was looking to buy I IDE raid card for my Mandrake system but alas all the cards I looked at had the windoze required at the back. Does anyone know of any decent IDE raid cards that will work with linux.
Problem With LG GSA 4040B DVD Burner
prophx
I'm having trouble with the LG GSA 4040B Dvd burner. The burner installs redhat 9 or Fedora 1, with no problem. It's when I get in the system the drive just doesn't show up in the fstab. Or if I try to mount it, it's just not there.
Radeon 7200 and mandrake 9.2
moumouth34
Hi, i'm a newbie with linux. I tried to install mandrake 9. 2 with burned cd but it says somthing like Second stage memory install failed or something like that. Looking on the internet I foud out that by installing by the hard drive could solve this promblem.
Sapphire Radeon 9600 pro and Mandrake 9.2
Uruclef
Hi guys! I have a problem: Mandrake 9. 2 can't recognize my video card. I tried all the different provided during the installation, but the situation remains still: when I boot my Linux, the server X doesn't start and I'm left to the shell.
Sound Problem
jmdlcar
Can someone help me on my HP Pavilion 553w. I install SuSE 9. 0 now I have noise while it is running. Do I need to turn something off or what do I have to do?.
USB Card Reader
jmdlcar
Dose anyone know if a usb card reader will work with Linux? It has 128mb of memory