RADEON 9800 PRO!!!!!!!!! MEGA HELP ME PLZZZZZZZZZZZZ!!!
This is a discussion about RADEON 9800 PRO!!!!!!!!! MEGA HELP ME PLZZZZZZZZZZZZ!!! in the Linux Hardware category; Hello, i'm portuguese, soo do not notice my english plz. . . I've installed Mandrake 10. them installed Kernel Source (kernel-source-2. 6. 3-7mdk. i586. rpm) using de command: urpmi kernel-source-2.
Hello, i'm portuguese, soo do not notice my english plz...
I've installed Mandrake 10.
them installed Kernel Source (kernel-source-2.6.3-7mdk.i586.rpm) using de command:
urpmi kernel-source-2.6.3-7mdk.i586.rpm
....installation success
Next i'd installed ATI fglrx-4.3.0-3-1-2-0-i386.rpm usig the command rpm -Uh --force fglrx-4.3.0-3-1-2-0-i386.rpm
.... Instalation success...
finally i went to /lib/modules/fglrx/build_mod/
and did:
-> chmod u+x make.sh
then...
->./make.sh
Success
last...
-> cd..
/lib/modules/fglrx/
-> chmod u+x make_install.sh
->./make_install
->fglrxconfig
With all and wen i run fglrxinfo:
#fglrxinfo
Loading required GL library /usr/lib/libGL.so.1
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.3 Mesa 4.0.4
What's bad?? did i make something bad?? I am seak of trying to install this with no success... plzzz some one help me!!
Thanks (sorry for the english again!!!)
I've installed Mandrake 10.
them installed Kernel Source (kernel-source-2.6.3-7mdk.i586.rpm) using de command:
urpmi kernel-source-2.6.3-7mdk.i586.rpm
....installation success
Next i'd installed ATI fglrx-4.3.0-3-1-2-0-i386.rpm usig the command rpm -Uh --force fglrx-4.3.0-3-1-2-0-i386.rpm
.... Instalation success...
finally i went to /lib/modules/fglrx/build_mod/
and did:
-> chmod u+x make.sh
then...
->./make.sh
Success
last...
-> cd..
/lib/modules/fglrx/
-> chmod u+x make_install.sh
->./make_install
->fglrxconfig
With all and wen i run fglrxinfo:
#fglrxinfo
Loading required GL library /usr/lib/libGL.so.1
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.3 Mesa 4.0.4
What's bad?? did i make something bad?? I am seak of trying to install this with no success... plzzz some one help me!!
Thanks (sorry for the english again!!!)
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Sep 17
Sep 18
0
2 minutes
Responses to this topic
'lo InHuM@N
It was in fact a Radeon 9600pro that braught me to linuxcompatible.org in the first place, and therefore I'm almost a bit grateful towards ATI that they produce gfx-cards that don't integrate into Linux all too easily as I wouldn't want to miss this incredibly helpful forum anymore
Anyway ... a couple of threads here deal with Radeon-installation, amongst those you will also find this one (*** SMUG-MODE: ON *** ...
http://www.linuxcompatible.org/thread26946-1.html
Check it out, maybe it's what you've been looking for. In all cases I'd suggest to try an "lsmod"-command from the shell to see if your AGP- and GFX-drivers/modules are loaded properly.
hope this helps
It was in fact a Radeon 9600pro that braught me to linuxcompatible.org in the first place, and therefore I'm almost a bit grateful towards ATI that they produce gfx-cards that don't integrate into Linux all too easily as I wouldn't want to miss this incredibly helpful forum anymore
Anyway ... a couple of threads here deal with Radeon-installation, amongst those you will also find this one (*** SMUG-MODE: ON *** ...
http://www.linuxcompatible.org/thread26946-1.html
Check it out, maybe it's what you've been looking for. In all cases I'd suggest to try an "lsmod"-command from the shell to see if your AGP- and GFX-drivers/modules are loaded properly.
hope this helps
