Dapper problems: F5D6020v2

I recently upgraded from Ubuntu 5. 10 to 6. 06 via sudo dist-upgrade. This has apparently cost me support for my Belkin F5D6020 WNIC, which I have used for a year. What I've done: 1. Ran the drver with Wine, unshielded the cabinet files, and looked for driver files.

Linux Networking 361 This topic was started by ,


data/avatar/default/avatar08.webp

6 Posts
Location -
Joined 2006-06-29
I recently upgraded from Ubuntu 5.10 to 6.06 via "sudo dist-upgrade". This has apparently cost me support for my Belkin F5D6020 WNIC, which I have used for a year.
What I've done:
1. Ran the drver with Wine, unshielded the cabinet files, and looked for driver files. Found none.
2. Downloaded RealTek's Net8180.inf driver and installed with NDISWrapper -i and used -d with lspci.
3. Googled for more info. In almost every case, there was a file called "Bel6020.inf", which was nowhere on the Web to be found, OR on the driver or ANY of the cabinets, or ANYWHERE on the accompanying driver CD. Sending me that file via email would be appreciated.
4. Ran it in Knoppix, and it said my PIRQs didn't match. I'm running it with "pci=usepirqmask" right now.
Any advice?

Participate on our website and join the conversation

You have already an account on our website? Use the link below to login.
Login
Create a new user account. Registration is free and takes only a few seconds.
Register
This topic is archived. New comments cannot be posted and votes cannot be cast.

Responses to this topic


data/avatar/default/avatar10.webp

2895 Posts
Location -
Joined 2002-08-30
Can you supply a link or two on the driver you are speaking of regarding what you found on google?
 
This ia a PCMCIA/carbus card, correct?
 
...and you had it working before with ndiswrapper?
 
Which version card is this? It can make a difference.

data/avatar/default/avatar10.webp

2895 Posts
Location -
Joined 2002-08-30
The link that you provided is the version 3 driver, not the version 2, which is located here on the Belkin site. I wonder if this is the problem. They could have different chipsets. Do you know if this is the case?
 
If it worked in the previous version of Ubuntu (without ndiswrapper), I am wondering what chipset that it actually has. It would be strange if it worked previously and not now, unless this is a bug in the upgrade process.
 
What I was wondering, is where did you see references to the Bel6020.inf on the web?
 
I can't get the cab files to extract after unzipping the exe package, so I can't see if it is there. How did you get the cab files to decompress? Maybe it just a fluke with Fedora Core 5.
 
Reference

data/avatar/default/avatar10.webp

2895 Posts
Location -
Joined 2002-08-30
Yep, the version 2 card has the Atmel chipset and version 3, the Realtek. This would explain the native support previously.
 
Reference

data/avatar/default/avatar10.webp

2895 Posts
Location -
Joined 2002-08-30
I just looked around the Ubuntu wiki and a few other places. You don't need ndiswrapper. However, thee seems to be an issue with these cards in the new version. See the thread located here.
 
Are you trying to hotplug the card, or have you also had the card in before booting?

data/avatar/default/avatar08.webp

6 Posts
Location -
Joined 2006-06-29
OP
I never hotplug networking peripherals. The Ubuntu wiki... is seriously outdated in spots. It only applies for Breezy for that card- nothing about Dapper. But anyways, thanks a ton for the file- even if it doesn't have the Bel6020 file, which I heard about on the NDISWraper wiki.
Do you think I should recompile my kernel with Atmel support (if I download the drivers from sf.net)? I need a fix quick, because I'm going away for a month later today (so if this thread gets bumped after a month, you'll know why).

data/avatar/default/avatar08.webp

6 Posts
Location -
Joined 2006-06-29
OP
By the way, where should I get the Atmel drivers?

data/avatar/default/avatar10.webp

2895 Posts
Location -
Joined 2002-08-30
First, the ndiswrapper wiki card list that you referenced (#10 under Belkin) is for a different chipset, namely the version 3 Realtek card. If you have the version 2 (Atmel), support is already built in.
 
However, as per my link in the first line of my post # 173849 above, there seems to be a bug with the upgrade to Dapper. See the last post on that bug report, which describes your situation exactly. Not you exact card, but the same chipset.
 
I would post a thread on the Ubuntu forums, where folks are most likely encountered this problem and have found a solution.

data/avatar/default/avatar08.webp

6 Posts
Location -
Joined 2006-06-29
OP
I already said that I coldplug it, so no help there.

data/avatar/default/avatar10.webp

2895 Posts
Location -
Joined 2002-08-30
...and if you read the last post by Vincent, he was unable to get the card to connect unless he followed the procedure that he outlined for hotplugging the card.
 
The bug report is somewhat confusing, as the original bug file speaks to the F5D6020 orinoco-based wireless card, the last comment, to your card chipset.
 
My point was to explain that there seems to be a problem with the card and PCMCIA.
 
The Amtel driver is already in Dapper, but apparently has a problem.
 
Given the issue at hand, this is why I suggested posting on the Ubuntu forum. Your more likely to get a good response, given others have had the same problem with these cards and someone is likely to have found a solution, which might include dumping the installed version and upgrading to a newer one. But, better let them tell you what exactly to do, then trying solutions that may or may not work.
 
I would rather have you go there, then get frustrated with not getting a direct answer from this forum.
 
 

data/avatar/default/avatar08.webp

6 Posts
Location -
Joined 2006-06-29
OP
The problem isn't hotplugging, I FOUND IT! w00t!
I upgraded my entire system EXCEPT the kernel, and it worked fine. This included removing the hotplug package (it got integrated into another one). Therefore, the problem lies somewhere between kernels 2.6.12 and 2.6.15. I have a transcript of all the modifications to the atmel_cs driver between the versions:

Quote:Excerpt from Linux Kernel 2.6.13 changelog:
 
commit 4a17a119381a5467144b18eaa954ba324e8a140b
Author: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Mon Jun 27 16:28:34 2005 -0700
 
[PATCH] pcmcia: id_table for atmel_cs.c
 
Add pcmcia_device_id table.
 
atmel_cs.c? Hmm...... Looks promising. But there's more.
And this, from the 2.6.14 log:
 
[PATCH] tpm: fix tpm_atmel.c on ICH6
 
While installing Debian on our new IBM X41 Tablet, I tried briefly to use
the built-in Atmel TPM. The Athmel TPM is also located on the LPC-bus of
the ICH6. To make it work I had to apply the following patch:
 
And this:
commit 72f98d38a890822cf547f94c8fbdef591b082ec2
Author: Jean Tourrilhes <jt@hpl.hp.com>
Date: Fri Sep 2 11:36:00 2005 -0700
 
[PATCH] atmel_cs : WE-17 support
 
This adds support for WE-17 to the atmel_cs driver. Not
tested, I don't have the HW.
 
Untested? Not good. I looked for a patch, and found this:
 
[PATCH] TPM compile fix
 
CC drivers/char/tpm/tpm_nsc.o
drivers/char/tpm/tpm_nsc.c:277: error: `platform_bus_type' undeclared here (not in a function)
...
CC drivers/char/tpm/tpm_atmel.o
drivers/char/tpm/tpm_atmel.c:175: error: `platform_bus_type' undeclared here (not in a function)
 
Make sure to include proper headers.
 
Bad headers... Oog...
 

Should I email this to someone at the dev team? The problem is definitely in the kernel.
And anyone else reading this, I warned you about the bump.
EDIT:

Quote:-Plug the PCMICA wireless card and the USB wireless adaptatorWhat if I don't have a USB adaptor?