Welcome to our website
To take full advantage of all features you need to login or register. Registration is completely free and takes only a few seconds.
Summary
Product:
VisionPlus VP-1020 PCI Satellite TV reciever
Vendor:
VisionPlus
Tested operating systems:
Ark Linux, Linux other
Most recent version of this submission:
VisionPlus VP-1020 PCI Satellite TV reciever
Average Rating:
Submit a new result for this product
Operating System: Linux other Rating:
Submitted on 2003-06-01 12:00:00
Operating System: Linux other Rating:
Submitted on 2004-04-01 12:00:00
Anonymous
Post License:
-
Post License:
-
The card works ONLY under a 2.6.x Kernel, to make it works you must install it
Operating System: Linux other Rating:
Submitted on 2004-05-01 12:00:00
Anonymous
Post License:
-
Post License:
-
The card works with mplayer under a 2.6.x kernel. Mandrake 10 Community have a 2.6.x kernel installed and running.
Operating System: Linux other Rating:
Submitted on 2004-12-01 12:00:00
Anonymous
Post License:
-
Post License:
-
With Mandrake 10.1 Community VP-1020 does NOT work.
# modprobe bttv i2c_hw=1 card=0x71
# modprobe dvb-bt8xx
# modprobe dst
# ls -la /dev/dvb
ls: /dev/dvb: No such file or directory
This means no device.
This means NO WORKING.
# modprobe bttv i2c_hw=1 card=0x71
# modprobe dvb-bt8xx
# modprobe dst
# ls -la /dev/dvb
ls: /dev/dvb: No such file or directory
This means no device.
This means NO WORKING.
Post License:
-
Possibly only the CI(Common Interface) model is Linux Optional.
To cut this sort apparently according to Linuxtv.org the drivers are publicly available at http://www.usa-x.org for RedHat 7.1 however I had no luck with getting them to work along with their application for this PCI card