Welcome to our website
To take full advantage of all features you need to login or register. Registration is completely free and takes only a few seconds.
Summary
Product:
ASRock K7S41GX
Vendor:
Asrock
Tested operating systems:
Linux other
Most recent version of this submission:
ASRock K7S41GX
Average Rating:
Submit a new result for this product
Operating System: Linux other Rating:
Submitted on 2005-05-01 12:00:00
Operating System: Linux other Rating:
Submitted on 2005-07-01 12:00:00
Sergio Lopez
Post License:
-
Post License:
-
-Video: autodetected
-lan ok, autodetected
-Sound: use i810xx (or something..) controller that comes with distro installation. it installs intel...something by default, change it
-Modem. it works great too. what i did was basically:
download driver: http://www.netodragon.com/slmodem-2.9.10_netodragon.tar.gz
-install kernel sources (for mandrake in the rpm manager)
-unpack the downloaded file
-in the directory where you unpacked run (from console)
$ make
-as 'root' user run:
# make install
(the following needs to be run once before start dialing as 'root' user to)
# modprobe slamr
# /usr/sbin/slmodemd --country=USA /dev/slamr0
the last command will give you the modem port ( /dev/... ). You must use this to configure your ppp dialup program (kppp for example). you can run the ppp dialup program as a normal user.
just dial and your're done
-lan ok, autodetected
-Sound: use i810xx (or something..) controller that comes with distro installation. it installs intel...something by default, change it
-Modem. it works great too. what i did was basically:
download driver: http://www.netodragon.com/slmodem-2.9.10_netodragon.tar.gz
-install kernel sources (for mandrake in the rpm manager)
-unpack the downloaded file
-in the directory where you unpacked run (from console)
$ make
-as 'root' user run:
# make install
(the following needs to be run once before start dialing as 'root' user to)
# modprobe slamr
# /usr/sbin/slmodemd --country=USA /dev/slamr0
the last command will give you the modem port ( /dev/... ). You must use this to configure your ppp dialup program (kppp for example). you can run the ppp dialup program as a normal user.
just dial and your're done
Operating System: Linux other Rating:
Submitted on 2005-07-01 12:00:00
Sergio Lopez
Post License:
-
Post License:
-
if you have problems starting to install Mandrake 10.0 (i've read of other distros with the same problem), just update to the latest BIOS. then it will install with no problems
Operating System: Linux other Rating:
Submitted on 2007-08-04 11:45:20
Anonymous
Post License:
GNU LGPL
Post License:
GNU LGPL
The ethernet port is not detect by IPcop, it use SIS 900 pci but its doesn't work.
Post License:
-
I also had to specify my drive LBA geometry on the kernel commandline as BIOS and Linux didn't agree.