SUSE 5008 Published by

The following updates has been released for openSUSE:

openSUSE-SU-2018:1953-1: moderate: Security update for libvorbis
openSUSE-SU-2018:1955-1: moderate: Security update for slurm
openSUSE-SU-2018:1956-1: moderate: Security update for tiff
openSUSE-SU-2018:1958-1: important: Security update for openslp
openSUSE-SU-2018:1961-1: moderate: Security update for exiv2
openSUSE-SU-2018:1962-1: moderate: Security update for nodejs6
openSUSE-SU-2018:1963-1: moderate: Security update for nodejs8



openSUSE-SU-2018:1953-1: moderate: Security update for libvorbis

openSUSE Security Update: Security update for libvorbis
______________________________________________________________________________

Announcement ID: openSUSE-SU-2018:1953-1
Rating: moderate
References: #1091070
Cross-References: CVE-2018-10392
Affected Products:
openSUSE Leap 15.0
______________________________________________________________________________

An update that fixes one vulnerability is now available.

Description:

This update for libvorbis fixes the following issues:

The following security issue was fixed:

- Fixed the validation of channels in mapping0_forward(), which
previously allowed remote attackers to cause a denial of service via
specially crafted files (CVE-2018-10392, bsc#1091070)

This update was imported from the SUSE:SLE-15:Update update project.


Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".

Alternatively you can run the command listed for your product:

- openSUSE Leap 15.0:

zypper in -t patch openSUSE-2018-722=1



Package List:

- openSUSE Leap 15.0 (i586 x86_64):

libvorbis-debugsource-1.3.6-lp150.3.3.1
libvorbis-devel-1.3.6-lp150.3.3.1
libvorbis0-1.3.6-lp150.3.3.1
libvorbis0-debuginfo-1.3.6-lp150.3.3.1
libvorbisenc2-1.3.6-lp150.3.3.1
libvorbisenc2-debuginfo-1.3.6-lp150.3.3.1
libvorbisfile3-1.3.6-lp150.3.3.1
libvorbisfile3-debuginfo-1.3.6-lp150.3.3.1

- openSUSE Leap 15.0 (x86_64):

libvorbis-devel-32bit-1.3.6-lp150.3.3.1
libvorbis0-32bit-1.3.6-lp150.3.3.1
libvorbis0-32bit-debuginfo-1.3.6-lp150.3.3.1
libvorbisenc2-32bit-1.3.6-lp150.3.3.1
libvorbisenc2-32bit-debuginfo-1.3.6-lp150.3.3.1
libvorbisfile3-32bit-1.3.6-lp150.3.3.1
libvorbisfile3-32bit-debuginfo-1.3.6-lp150.3.3.1

- openSUSE Leap 15.0 (noarch):

libvorbis-doc-1.3.6-lp150.3.3.1


References:

https://www.suse.com/security/cve/CVE-2018-10392.html
https://bugzilla.suse.com/1091070

--


openSUSE-SU-2018:1955-1: moderate: Security update for slurm

openSUSE Security Update: Security update for slurm
______________________________________________________________________________

Announcement ID: openSUSE-SU-2018:1955-1
Rating: moderate
References: #1095508 #1100850
Cross-References: CVE-2018-10995
Affected Products:
openSUSE Leap 15.0
______________________________________________________________________________

An update that solves one vulnerability and has one errata
is now available.

Description:

This update for slurm to version 17.11.7 fixes the following issues:

This security issue was fixed:

- CVE-2018-10995: Ensure correct handling of user names and group ids
(bsc#1095508).

These non-security issues were fixed:

- CRAY - Add slurmsmwd to the contribs/cray dir
- PMIX - Added the direct connect authentication.
- Prevent the backup slurmctld from losing the active/available node
features list on takeover.
- Be able to force power_down of cloud node even if in power_save state.
- Allow cloud nodes to be recognized in Slurm when booted out of band.
- Notify srun and ctld when unkillable stepd exits.
- Fixes daemoniziation in newly introduced slurmsmwd daemon.

The following tracked packaging changes are included:

- avoid postun error in libpmi0 (bsc#1100850)

This update was imported from the SUSE:SLE-15:Update update project.


Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".

Alternatively you can run the command listed for your product:

- openSUSE Leap 15.0:

zypper in -t patch openSUSE-2018-729=1



Package List:

- openSUSE Leap 15.0 (x86_64):

libpmi0-17.11.7-lp150.5.7.1
libpmi0-debuginfo-17.11.7-lp150.5.7.1
libslurm32-17.11.7-lp150.5.7.1
libslurm32-debuginfo-17.11.7-lp150.5.7.1
perl-slurm-17.11.7-lp150.5.7.1
perl-slurm-debuginfo-17.11.7-lp150.5.7.1
slurm-17.11.7-lp150.5.7.1
slurm-auth-none-17.11.7-lp150.5.7.1
slurm-auth-none-debuginfo-17.11.7-lp150.5.7.1
slurm-config-17.11.7-lp150.5.7.1
slurm-debuginfo-17.11.7-lp150.5.7.1
slurm-debugsource-17.11.7-lp150.5.7.1
slurm-devel-17.11.7-lp150.5.7.1
slurm-doc-17.11.7-lp150.5.7.1
slurm-lua-17.11.7-lp150.5.7.1
slurm-lua-debuginfo-17.11.7-lp150.5.7.1
slurm-munge-17.11.7-lp150.5.7.1
slurm-munge-debuginfo-17.11.7-lp150.5.7.1
slurm-node-17.11.7-lp150.5.7.1
slurm-node-debuginfo-17.11.7-lp150.5.7.1
slurm-openlava-17.11.7-lp150.5.7.1
slurm-pam_slurm-17.11.7-lp150.5.7.1
slurm-pam_slurm-debuginfo-17.11.7-lp150.5.7.1
slurm-plugins-17.11.7-lp150.5.7.1
slurm-plugins-debuginfo-17.11.7-lp150.5.7.1
slurm-seff-17.11.7-lp150.5.7.1
slurm-sjstat-17.11.7-lp150.5.7.1
slurm-slurmdbd-17.11.7-lp150.5.7.1
slurm-slurmdbd-debuginfo-17.11.7-lp150.5.7.1
slurm-sql-17.11.7-lp150.5.7.1
slurm-sql-debuginfo-17.11.7-lp150.5.7.1
slurm-sview-17.11.7-lp150.5.7.1
slurm-sview-debuginfo-17.11.7-lp150.5.7.1
slurm-torque-17.11.7-lp150.5.7.1
slurm-torque-debuginfo-17.11.7-lp150.5.7.1


References:

https://www.suse.com/security/cve/CVE-2018-10995.html
https://bugzilla.suse.com/1095508
https://bugzilla.suse.com/1100850

--


openSUSE-SU-2018:1956-1: moderate: Security update for tiff

openSUSE Security Update: Security update for tiff
______________________________________________________________________________

Announcement ID: openSUSE-SU-2018:1956-1
Rating: moderate
References: #1074317 #1082332 #1082825 #1086408 #1092949

Cross-References: CVE-2017-11613 CVE-2017-18013 CVE-2018-10963
CVE-2018-7456 CVE-2018-8905
Affected Products:
openSUSE Leap 15.0
______________________________________________________________________________

An update that fixes 5 vulnerabilities is now available.

Description:

This update for tiff fixes the following security issues:

These security issues were fixed:

- CVE-2017-18013: Fixed a NULL pointer dereference in the
tif_print.cTIFFPrintDirectory function that could have lead to denial of
service (bsc#1074317).
- CVE-2018-10963: Fixed an assertion failure in the
TIFFWriteDirectorySec() function in tif_dirwrite.c, which allowed remote
attackers to cause a denial
of service via a crafted file (bsc#1092949).
- CVE-2018-7456: Prevent a NULL Pointer dereference in the function
TIFFPrintDirectory when using the tiffinfo tool to print crafted TIFF
information, a different vulnerability than CVE-2017-18013 (bsc#1082825).
- CVE-2017-11613: Prevent denial of service in the TIFFOpen function.
During the TIFFOpen process, td_imagelength is not checked. The value of
td_imagelength can be directly controlled by an input file. In the
ChopUpSingleUncompressedStrip function, the _TIFFCheckMalloc function is
called based on td_imagelength. If the value of td_imagelength is set
close to the amount of system memory, it will hang the system or trigger
the OOM killer (bsc#1082332).
- CVE-2018-8905: Prevent heap-based buffer overflow in the function
LZWDecodeCompat via a crafted TIFF file (bsc#1086408).

This update was imported from the SUSE:SLE-15:Update update project.


Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".

Alternatively you can run the command listed for your product:

- openSUSE Leap 15.0:

zypper in -t patch openSUSE-2018-728=1



Package List:

- openSUSE Leap 15.0 (i586 x86_64):

libtiff-devel-4.0.9-lp150.4.3.1
libtiff5-4.0.9-lp150.4.3.1
libtiff5-debuginfo-4.0.9-lp150.4.3.1
tiff-4.0.9-lp150.4.3.1
tiff-debuginfo-4.0.9-lp150.4.3.1
tiff-debugsource-4.0.9-lp150.4.3.1

- openSUSE Leap 15.0 (x86_64):

libtiff-devel-32bit-4.0.9-lp150.4.3.1
libtiff5-32bit-4.0.9-lp150.4.3.1
libtiff5-32bit-debuginfo-4.0.9-lp150.4.3.1


References:

https://www.suse.com/security/cve/CVE-2017-11613.html
https://www.suse.com/security/cve/CVE-2017-18013.html
https://www.suse.com/security/cve/CVE-2018-10963.html
https://www.suse.com/security/cve/CVE-2018-7456.html
https://www.suse.com/security/cve/CVE-2018-8905.html
https://bugzilla.suse.com/1074317
https://bugzilla.suse.com/1082332
https://bugzilla.suse.com/1082825
https://bugzilla.suse.com/1086408
https://bugzilla.suse.com/1092949

--


openSUSE-SU-2018:1958-1: important: Security update for openslp

openSUSE Security Update: Security update for openslp
______________________________________________________________________________

Announcement ID: openSUSE-SU-2018:1958-1
Rating: important
References: #1090638
Cross-References: CVE-2017-17833
Affected Products:
openSUSE Leap 15.0
______________________________________________________________________________

An update that fixes one vulnerability is now available.

Description:

This update for openslp fixes the following issues:

- CVE-2017-17833: Prevent heap-related memory corruption issue which may
have manifested itself as a denial-of-service or a remote code-execution
vulnerability (bsc#1090638)
- Prevent out of bounds reads in message parsing

This update was imported from the SUSE:SLE-15:Update update project.


Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".

Alternatively you can run the command listed for your product:

- openSUSE Leap 15.0:

zypper in -t patch openSUSE-2018-725=1



Package List:

- openSUSE Leap 15.0 (i586 x86_64):

openslp-2.0.0-lp150.5.3.1
openslp-debuginfo-2.0.0-lp150.5.3.1
openslp-debugsource-2.0.0-lp150.5.3.1
openslp-devel-2.0.0-lp150.5.3.1
openslp-server-2.0.0-lp150.5.3.1
openslp-server-debuginfo-2.0.0-lp150.5.3.1

- openSUSE Leap 15.0 (x86_64):

openslp-32bit-2.0.0-lp150.5.3.1
openslp-32bit-debuginfo-2.0.0-lp150.5.3.1


References:

https://www.suse.com/security/cve/CVE-2017-17833.html
https://bugzilla.suse.com/1090638

--


openSUSE-SU-2018:1961-1: moderate: Security update for exiv2

openSUSE Security Update: Security update for exiv2
______________________________________________________________________________

Announcement ID: openSUSE-SU-2018:1961-1
Rating: moderate
References: #1048883 #1050257 #1051188 #1054590 #1054592
#1054593 #1060995 #1060996 #1061000 #1061023

Cross-References: CVE-2017-11337 CVE-2017-11338 CVE-2017-11339
CVE-2017-11340 CVE-2017-11553 CVE-2017-11591
CVE-2017-11592 CVE-2017-11683 CVE-2017-12955
CVE-2017-12956 CVE-2017-12957 CVE-2017-14859
CVE-2017-14860 CVE-2017-14862 CVE-2017-14864

Affected Products:
openSUSE Leap 15.0
______________________________________________________________________________

An update that fixes 15 vulnerabilities is now available.

Description:

This update for exiv2 to 0.26 fixes the following security issues:

- CVE-2017-14864: Prevent invalid memory address dereference in
Exiv2::getULong that could have caused a segmentation fault and
application crash, which leads to denial of service (bsc#1060995).
- CVE-2017-14862: Prevent invalid memory address dereference in
Exiv2::DataValue::read that could have caused a segmentation fault and
application crash, which leads to denial of service (bsc#1060996).
- CVE-2017-14859: Prevent invalid memory address dereference in
Exiv2::StringValueBase::read that could have caused a segmentation fault
and application crash, which leads to denial of service (bsc#1061000).
- CVE-2017-14860: Prevent heap-based buffer over-read in the
Exiv2::Jp2Image::readMetadata function via a crafted input that could
have lead to a denial of service attack (bsc#1061023).
- CVE-2017-11337: Prevent invalid free in the Action::TaskFactory::cleanup
function via a crafted input that could have lead to a remote denial of
service attack (bsc#1048883).
- CVE-2017-11338: Prevent infinite loop in the
Exiv2::Image::printIFDStructure function via a crafted input that could
have lead to a remote denial of service attack (bsc#1048883).
- CVE-2017-11339: Prevent heap-based buffer overflow in the
Image::printIFDStructure function via a crafted input that could have
lead to a remote denial of service attack (bsc#1048883).
- CVE-2017-11340: Prevent Segmentation fault in the XmpParser::terminate()
function via a crafted input that could have lead to a remote denial of
service attack (bsc#1048883).
- CVE-2017-12955: Prevent heap-based buffer overflow. The vulnerability
caused an out-of-bounds write in Exiv2::Image::printIFDStructure(),
which may lead to remote denial of service or possibly unspecified other
impact (bsc#1054593).
- CVE-2017-12956: Preventn illegal address access in
Exiv2::FileIo::path[abi:cxx11]() that could have lead to remote denial
of service (bsc#1054592).
- CVE-2017-12957: Prevent heap-based buffer over-read that was triggered
in the Exiv2::Image::io function and could have lead to remote denial of
service (bsc#1054590).
- CVE-2017-11683: Prevent reachable assertion in the
Internal::TiffReader::visitDirectory function that could have lead to a
remote denial of service attack via crafted input (bsc#1051188).
- CVE-2017-11591: Prevent Floating point exception in the Exiv2::ValueType
function that could have lead to a remote denial of service attack via
crafted input (bsc#1050257).
- CVE-2017-11553: Prevent illegal address access in the extend_alias_table
function via a crafted input could have lead to remote denial of service.
- CVE-2017-11592: Prevent mismatched Memory Management Routines
vulnerability in the Exiv2::FileIo::seek function that could have lead
to a remote denial of service attack (heap memory corruption) via
crafted input.

This update was imported from the SUSE:SLE-15:Update update project.


Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".

Alternatively you can run the command listed for your product:

- openSUSE Leap 15.0:

zypper in -t patch openSUSE-2018-727=1



Package List:

- openSUSE Leap 15.0 (i586 x86_64):

exiv2-0.26-lp150.5.3.1
exiv2-debuginfo-0.26-lp150.5.3.1
exiv2-debugsource-0.26-lp150.5.3.1
libexiv2-26-0.26-lp150.5.3.1
libexiv2-26-debuginfo-0.26-lp150.5.3.1
libexiv2-devel-0.26-lp150.5.3.1
libexiv2-doc-0.26-lp150.5.3.1

- openSUSE Leap 15.0 (x86_64):

libexiv2-26-32bit-0.26-lp150.5.3.1
libexiv2-26-32bit-debuginfo-0.26-lp150.5.3.1

- openSUSE Leap 15.0 (noarch):

exiv2-lang-0.26-lp150.5.3.1


References:

https://www.suse.com/security/cve/CVE-2017-11337.html
https://www.suse.com/security/cve/CVE-2017-11338.html
https://www.suse.com/security/cve/CVE-2017-11339.html
https://www.suse.com/security/cve/CVE-2017-11340.html
https://www.suse.com/security/cve/CVE-2017-11553.html
https://www.suse.com/security/cve/CVE-2017-11591.html
https://www.suse.com/security/cve/CVE-2017-11592.html
https://www.suse.com/security/cve/CVE-2017-11683.html
https://www.suse.com/security/cve/CVE-2017-12955.html
https://www.suse.com/security/cve/CVE-2017-12956.html
https://www.suse.com/security/cve/CVE-2017-12957.html
https://www.suse.com/security/cve/CVE-2017-14859.html
https://www.suse.com/security/cve/CVE-2017-14860.html
https://www.suse.com/security/cve/CVE-2017-14862.html
https://www.suse.com/security/cve/CVE-2017-14864.html
https://bugzilla.suse.com/1048883
https://bugzilla.suse.com/1050257
https://bugzilla.suse.com/1051188
https://bugzilla.suse.com/1054590
https://bugzilla.suse.com/1054592
https://bugzilla.suse.com/1054593
https://bugzilla.suse.com/1060995
https://bugzilla.suse.com/1060996
https://bugzilla.suse.com/1061000
https://bugzilla.suse.com/1061023

--


openSUSE-SU-2018:1962-1: moderate: Security update for nodejs6

openSUSE Security Update: Security update for nodejs6
______________________________________________________________________________

Announcement ID: openSUSE-SU-2018:1962-1
Rating: moderate
References: #1091764 #1097375
Cross-References: CVE-2018-7167
Affected Products:
openSUSE Leap 42.3
______________________________________________________________________________

An update that solves one vulnerability and has one errata
is now available.

Description:

This update for nodejs6 to version 6.14.3 fixes the following issues:

The following security vulnerability was addressed:

- Fixed a denial of service (DoS) vulnerability in Buffer.fill(), which
could hang when being called (CVE-2018-7167, bsc#1097375).

The following other changes were made:

- Use absolute paths in executable shebang lines
- Fixed building with ICU61.1 (bsc#1091764)

This update was imported from the SUSE:SLE-12:Update update project.


Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".

Alternatively you can run the command listed for your product:

- openSUSE Leap 42.3:

zypper in -t patch openSUSE-2018-723=1



Package List:

- openSUSE Leap 42.3 (i586 x86_64):

nodejs6-6.14.3-12.1
nodejs6-debuginfo-6.14.3-12.1
nodejs6-debugsource-6.14.3-12.1
nodejs6-devel-6.14.3-12.1
npm6-6.14.3-12.1

- openSUSE Leap 42.3 (noarch):

nodejs6-docs-6.14.3-12.1


References:

https://www.suse.com/security/cve/CVE-2018-7167.html
https://bugzilla.suse.com/1091764
https://bugzilla.suse.com/1097375

--


openSUSE-SU-2018:1963-1: moderate: Security update for nodejs8

openSUSE Security Update: Security update for nodejs8
______________________________________________________________________________

Announcement ID: openSUSE-SU-2018:1963-1
Rating: moderate
References: #1091764 #1097375 #1097401 #1097404
Cross-References: CVE-2018-1000168 CVE-2018-7161 CVE-2018-7167

Affected Products:
openSUSE Leap 15.0
______________________________________________________________________________

An update that solves three vulnerabilities and has one
errata is now available.

Description:

This update for nodejs8 to version 8.11.3 fixes the following issues:

These security issues were fixed:

- CVE-2018-7167: Calling Buffer.fill() or Buffer.alloc() with some
parameters could have lead to a hang which could have resulted in a DoS
(bsc#1097375).
- CVE-2018-7161: By interacting with the http2 server in a manner that
triggered a cleanup bug where objects are used in native code after they
are no longer available an attacker could have caused a denial of
service (DoS) by causing a node server providing an http2 server to
crash (bsc#1097404).
- CVE-2018-1000168: Fixed a denial of service vulnerability by unbundling
nghttp2 (bsc#1097401)

This update was imported from the SUSE:SLE-15:Update update project.


Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".

Alternatively you can run the command listed for your product:

- openSUSE Leap 15.0:

zypper in -t patch openSUSE-2018-724=1



Package List:

- openSUSE Leap 15.0 (i586 x86_64):

nodejs8-8.11.3-lp150.2.3.1
nodejs8-debuginfo-8.11.3-lp150.2.3.1
nodejs8-debugsource-8.11.3-lp150.2.3.1
nodejs8-devel-8.11.3-lp150.2.3.1
npm8-8.11.3-lp150.2.3.1

- openSUSE Leap 15.0 (noarch):

nodejs8-docs-8.11.3-lp150.2.3.1


References:

https://www.suse.com/security/cve/CVE-2018-1000168.html
https://www.suse.com/security/cve/CVE-2018-7161.html
https://www.suse.com/security/cve/CVE-2018-7167.html
https://bugzilla.suse.com/1091764
https://bugzilla.suse.com/1097375
https://bugzilla.suse.com/1097401
https://bugzilla.suse.com/1097404

--