Curl/ntp Updates for Slackware
Posted on: 02/14/2014 11:56 AM

The following updates has been released for Slackware: curl (SSA:2014-044-01) and ntp (SSA:2014-044-02)

curl (SSA:2014-044-01)
New curl packages are available for Slackware 13.0, 13.1, 13.37, 14.0, 14.1,
and -current to fix a security issue.


Here are the details from the Slackware 14.1 ChangeLog:
+--------------------------+
patches/packages/curl-7.35.0-i486-1_slack14.1.txz: Upgraded.
This update fixes a flaw where libcurl could, in some circumstances, reuse
the wrong connection when asked to do an NTLM-authenticated HTTP or HTTPS
request.
For more information, see:
http://curl.haxx.se/docs/adv_20140129.html
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2014-0015
(* Security fix *)
+--------------------------+


Where to find the new packages:
+-----------------------------+

Thanks to the friendly folks at the OSU Open Source Lab
(http://osuosl.org) for donating FTP and rsync hosting
to the Slackware project! :-)

Also see the "Get Slack" section on http://slackware.com for
additional mirror sites near you.

Updated package for Slackware 13.0:
ftp://ftp.slackware.com/pub/slackware/slackware-13.0/patches/packages/curl-7.35.0-i486-1_slack13.0.txz

Updated package for Slackware x86_64 13.0:
ftp://ftp.slackware.com/pub/slackware/slackware64-13.0/patches/packages/curl-7.35.0-x86_64-1_slack13.0.txz

Updated package for Slackware 13.1:
ftp://ftp.slackware.com/pub/slackware/slackware-13.1/patches/packages/curl-7.35.0-i486-1_slack13.1.txz

Updated package for Slackware x86_64 13.1:
ftp://ftp.slackware.com/pub/slackware/slackware64-13.1/patches/packages/curl-7.35.0-x86_64-1_slack13.1.txz

Updated package for Slackware 13.37:
ftp://ftp.slackware.com/pub/slackware/slackware-13.37/patches/packages/curl-7.35.0-i486-1_slack13.37.txz

Updated package for Slackware x86_64 13.37:
ftp://ftp.slackware.com/pub/slackware/slackware64-13.37/patches/packages/curl-7.35.0-x86_64-1_slack13.37.txz

Updated package for Slackware 14.0:
ftp://ftp.slackware.com/pub/slackware/slackware-14.0/patches/packages/curl-7.35.0-i486-1_slack14.0.txz

Updated package for Slackware x86_64 14.0:
ftp://ftp.slackware.com/pub/slackware/slackware64-14.0/patches/packages/curl-7.35.0-x86_64-1_slack14.0.txz

Updated package for Slackware 14.1:
ftp://ftp.slackware.com/pub/slackware/slackware-14.1/patches/packages/curl-7.35.0-i486-1_slack14.1.txz

Updated package for Slackware x86_64 14.1:
ftp://ftp.slackware.com/pub/slackware/slackware64-14.1/patches/packages/curl-7.35.0-x86_64-1_slack14.1.txz

Updated package for Slackware -current:
ftp://ftp.slackware.com/pub/slackware/slackware-current/slackware/n/curl-7.35.0-i486-1.txz

Updated package for Slackware x86_64 -current:
ftp://ftp.slackware.com/pub/slackware/slackware64-current/slackware64/n/curl-7.35.0-x86_64-1.txz


MD5 signatures:
+-------------+

Slackware 13.0 package:
08912169b59fa0b024a844abaca29e6f curl-7.35.0-i486-1_slack13.0.txz

Slackware x86_64 13.0 package:
e1bbd6533504ae48901fe07744513d8b curl-7.35.0-x86_64-1_slack13.0.txz

Slackware 13.1 package:
12e66cca566dc0ff279f44e74c810012 curl-7.35.0-i486-1_slack13.1.txz

Slackware x86_64 13.1 package:
20ea769b61df981015743adc4f7322f4 curl-7.35.0-x86_64-1_slack13.1.txz

Slackware 13.37 package:
0462c2439896e16dae20e4838f2e770b curl-7.35.0-i486-1_slack13.37.txz

Slackware x86_64 13.37 package:
1c758a10531b08a36d8fcd3ea074c105 curl-7.35.0-x86_64-1_slack13.37.txz

Slackware 14.0 package:
fddac12eef8bf903a8371d23edff8b97 curl-7.35.0-i486-1_slack14.0.txz

Slackware x86_64 14.0 package:
24fae3d8cf2f850080820145331772b4 curl-7.35.0-x86_64-1_slack14.0.txz

Slackware 14.1 package:
b51b7e0da95663e5f7990b952738d357 curl-7.35.0-i486-1_slack14.1.txz

Slackware x86_64 14.1 package:
9124b23d5155506ff672c145c235589d curl-7.35.0-x86_64-1_slack14.1.txz

Slackware -current package:
2f4e6a8216f2627b6b05c0a867159599 n/curl-7.35.0-i486-1.txz

Slackware x86_64 -current package:
fb3cdb6ff3996586f747a9ff6b8a393a n/curl-7.35.0-x86_64-1.txz


Installation instructions:
+------------------------+

Upgrade the package as root:
# upgradepkg curl-7.35.0-i486-1_slack14.1.txz


ntp (SSA:2014-044-02)
New ntp packages are available for Slackware 13.0, 13.1, 13.37, 14.0, 14.1,
and -current to fix a security issue.


Here are the details from the Slackware 14.1 ChangeLog:
+--------------------------+
patches/packages/ntp-4.2.6p5-i486-5_slack14.1.txz: Rebuilt.
All stable versions of NTP remain vulnerable to a remote attack where the
"ntpdc -c monlist" command can be used to amplify network traffic as part
of a denial of service attack. By default, Slackware is not vulnerable
since it includes "noquery" as a default restriction. However, it is
vulnerable if this restriction is removed. To help mitigate this flaw,
"disable monitor" has been added to the default ntp.conf (which will disable
the monlist command even if other queries are allowed), and the default
restrictions have been extended to IPv6 as well.
All users of the NTP daemon should make sure that their ntp.conf contains
"disable monitor" to prevent misuse of the NTP service. The new ntp.conf
file will be installed as /etc/ntp.conf.new with a package upgrade, but the
changes will need to be merged into any existing ntp.conf file by the admin.
For more information, see:
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2013-5211
http://www.kb.cert.org/vuls/id/348126
(* Security fix *)
+--------------------------+


Where to find the new packages:
+-----------------------------+

Thanks to the friendly folks at the OSU Open Source Lab
(http://osuosl.org) for donating FTP and rsync hosting
to the Slackware project! :-)

Also see the "Get Slack" section on http://slackware.com for
additional mirror sites near you.

Updated package for Slackware 13.0:
ftp://ftp.slackware.com/pub/slackware/slackware-13.0/patches/packages/ntp-4.2.6p5-i486-1_slack13.0.txz

Updated package for Slackware x86_64 13.0:
ftp://ftp.slackware.com/pub/slackware/slackware64-13.0/patches/packages/ntp-4.2.6p5-x86_64-1_slack13.0.txz

Updated package for Slackware 13.1:
ftp://ftp.slackware.com/pub/slackware/slackware-13.1/patches/packages/ntp-4.2.6p5-i486-1_slack13.1.txz

Updated package for Slackware x86_64 13.1:
ftp://ftp.slackware.com/pub/slackware/slackware64-13.1/patches/packages/ntp-4.2.6p5-x86_64-1_slack13.1.txz

Updated package for Slackware 13.37:
ftp://ftp.slackware.com/pub/slackware/slackware-13.37/patches/packages/ntp-4.2.6p5-i486-1_slack13.37.txz

Updated package for Slackware x86_64 13.37:
ftp://ftp.slackware.com/pub/slackware/slackware64-13.37/patches/packages/ntp-4.2.6p5-x86_64-1_slack13.37.txz

Updated package for Slackware 14.0:
ftp://ftp.slackware.com/pub/slackware/slackware-14.0/patches/packages/ntp-4.2.6p5-i486-3_slack14.0.txz

Updated package for Slackware x86_64 14.0:
ftp://ftp.slackware.com/pub/slackware/slackware64-14.0/patches/packages/ntp-4.2.6p5-x86_64-3_slack14.0.txz

Updated package for Slackware 14.1:
ftp://ftp.slackware.com/pub/slackware/slackware-14.1/patches/packages/ntp-4.2.6p5-i486-5_slack14.1.txz

Updated package for Slackware x86_64 14.1:
ftp://ftp.slackware.com/pub/slackware/slackware64-14.1/patches/packages/ntp-4.2.6p5-x86_64-5_slack14.1.txz

Updated package for Slackware -current:
ftp://ftp.slackware.com/pub/slackware/slackware-current/slackware/n/ntp-4.2.6p5-i486-5.txz

Updated package for Slackware x86_64 -current:
ftp://ftp.slackware.com/pub/slackware/slackware64-current/slackware64/n/ntp-4.2.6p5-x86_64-5.txz


MD5 signatures:
+-------------+

Slackware 13.0 package:
3accaa602c77da7b13489043771af46c ntp-4.2.6p5-i486-1_slack13.0.txz

Slackware x86_64 13.0 package:
df5a6488330ea4f272b6989dc7265187 ntp-4.2.6p5-x86_64-1_slack13.0.txz

Slackware 13.1 package:
54a1f268bfa1d08a998fe67a1ac72b25 ntp-4.2.6p5-i486-1_slack13.1.txz

Slackware x86_64 13.1 package:
bfa576d25822d68e2774b2e8b2977fee ntp-4.2.6p5-x86_64-1_slack13.1.txz

Slackware 13.37 package:
5a098aa45264a2db66bb64437e0a5323 ntp-4.2.6p5-i486-1_slack13.37.txz

Slackware x86_64 13.37 package:
d46a9faf04b6bb1f10da492bd2150bfe ntp-4.2.6p5-x86_64-1_slack13.37.txz

Slackware 14.0 package:
8cb41c56322999a0bfd77b62afdb4b78 ntp-4.2.6p5-i486-3_slack14.0.txz

Slackware x86_64 14.0 package:
9b1fef2c9768655d6e563b51ef996cb4 ntp-4.2.6p5-x86_64-3_slack14.0.txz

Slackware 14.1 package:
45a99f84f5b8de1711f55905f2b956bb ntp-4.2.6p5-i486-5_slack14.1.txz

Slackware x86_64 14.1 package:
09f5e6d88e4eeb3e77629bf4a35bb319 ntp-4.2.6p5-x86_64-5_slack14.1.txz

Slackware -current package:
28f145dd7fa671cd85b507ee5a73ab59 n/ntp-4.2.6p5-i486-5.txz

Slackware x86_64 -current package:
d47b61aa02c44ceb1ea634bd2dc2a7f5 n/ntp-4.2.6p5-x86_64-5.txz


Installation instructions:
+------------------------+

Upgrade the package as root:
# upgradepkg ntp-4.2.6p5-i486-5_slack14.1.txz

Ensure that your /etc/ntp.conf contains a line like this:
disable monitor

Then, restart the NTP daemon:

# sh /etc/rc.d/rc.ntpd restart





Printed from Linux Compatible (http://www.linuxcompatible.org/news/story/curlntp_updates_for_slackware.html)