Linux Compatible

Asus A8V Deluxe (4)

This product has been tested on the following operating systems: Mandriva Linux,Ubuntu Linux,SUSE Linux,KNOPPIX and has a average rating of 4

The last rating (4) has been submitted on 2010-03-07 10:21:32 by Anonymous running Mandriva Linux:
Works great. Only issue is that there is no "Parallel ATA" support for the Promise RAID/SATA controller. The IDE connections are there and they work under windows, but not in linux.

ASUS A7S8X-MX Motherboard (5)

This product has been tested on the following operating systems: Linux other,Xandros Desktop OS,KNOPPIX and has a average rating of 5

The last rating (5) has been submitted on 2007-07-10 22:12:38 by Anonymous running Linux other:
Works great! Everything was found. Booted with kernel 2.6.10 using Mepis (Debian based distro)

HP Laserjet 1200 (5)

This product has been tested on the following operating systems: KNOPPIX,Ubuntu Linux and has a average rating of 5

The last rating (5) has been submitted on 2006-11-13 18:36:34 by Anonymous running KNOPPIX:
-

Aspire 1350 (4)

This product has been tested on the following operating systems: KNOPPIX and has a average rating of 4

The last rating (4) has been submitted on 2006-10-27 08:53:27 by Anonymous running KNOPPIX:
The mass storage devices on Linux Knoppix with linux kernel 2.6 are not working. (My Logitech USB mouse is working fine...) I also tried with Ubuntu Live CD. Still not working. I also updated the BIOS from V3A24 to V3A29. If you want to see the error, here is the error message: usb 1-1: new high speed USB device using ehci_hcd and address 3 ehci_hcd 0000:00:10.3: Unlink after no-IRQ? Controller is probably using the wrong IRQ. ... usb 1-1: new high speed USB device using ehci_hcd and address 53 usb 1-1: device not accepting address 53, error -110 Here is the explanation of the problem: http://www.linux-usb.org/FAQ.html#ts6 Good Luck ;)