Linux Compatible

AWLC4030-II (5)

This product has been tested on the following operating systems: Linux other and has a average rating of 5

The last rating (5) has been submitted on 2010-04-22 08:44:26 by Anonymous running Linux other:
Super G Wireless Cardbus Adapter works with TinyMe and Tiny Core Linux 2.x Uses the Atheros AR5001X+ (5k) chipset which is included in kernel 2.6.25+ Also works with Damn Small Linux 3.x (kernel 2.4.26) using windows drivers and ndiswrapper.

AWLL3025V2 (5)

This product has been tested on the following operating systems: Ubuntu Linux and has a average rating of 5

The last rating (5) has been submitted on 2010-04-21 08:16:04 by Anonymous running Ubuntu Linux:
This 802.11g USB adapter works flawlessly with Ubuntu 9.10 and Tiny Core Linux. Uses the ZyDAS 1211rw chipset which is included in the kernel since version 2.6.18.

10/100 Cardbus Network Adapter (5)

This product has been tested on the following operating systems: Debian GNU/Linux,Ark Linux and has a average rating of 5

The last rating (5) has been submitted on 2009-03-26 10:49:28 by Anonymous running Debian GNU/Linux:
This is the generic Airlink 10/100 Cardbus NIC that was selling for ten bucks at Fry's for a while. Doesn't even have a model number. Uses the 8139too and mii driver modules from a vanilla 2.6 kernel. Recognized automatically by udevd, no muss no fuss.

awll3055 (3)

This product has been tested on the following operating systems: Ark Linux and has a average rating of 3

The last rating (1) has been submitted on 2008-11-24 17:23:02 by Anonymous running Ark Linux:
-

AWLH3026T (4)

This product has been tested on the following operating systems: Mandriva Linux,Ubuntu Linux,PCLinuxOS and has a average rating of 4

The last rating (5) has been submitted on 2008-01-07 18:17:55 by Anonymous running Mandriva Linux:
Works with Mandriva 2007.1 LIVE CD out of box w/ no problems... Its a Ralink RT2500 chipsets based wireless 802.11g device which many distros support off the bat.

AWLH5026 MIMO XR (5)

This product has been tested on the following operating systems: Gentoo Linux and has a average rating of 5

The last rating (5) has been submitted on 2007-06-28 10:51:25 by Anonymous running Gentoo Linux:
Bear in mind that this method is a work in progress but should work for almost any linux version with minor modifications. 1. Have ndiswrapper, iwconfig, and dhcpcd tools available. 2. I put a static version of dhcpcd in my /root dir. 3. put your vendor supplied cd in your drive. 4. copy your cd contents to an accessible area. 5. ndiswrapper -i rt61.inf 6. ndiswrapper -l rt61 : driver installed device (1814:0401) present 7. I created a network.sh script: #/bin/bash clear echo Starting ndiswrapper... modprobe ndiswrapper echo Turning on wireless card... iwconfig wlan0 key echo Setting IP Address... ifconfig wlan0 up echo Running dhcp... ./dhcpcd wlan0 echo Done echo 7. chmod 770 network.sh 8. ping The key to getting this card working is getting the proper key into the card. After that, it should automatically scan for wireless networks and latch onto one that matches the encryption key. iwlist wlan0 scanning should also give you some usefull output - it will scan for wireless networks. Good luck and happy networking! codifex maximus

AirLink AWLC3025 (1)

This product has been tested on the following operating systems: Linux other,Ubuntu Linux and has a average rating of 1

The last rating (1) has been submitted on 2007-05-22 10:40:26 by Anonymous running Linux other:
Support for the TI chipset in this PCMCIA 802.11G card is evolving daily. http://acx100.sourceforge.net/
The card works for a while under light loads, but reliably flakes out at high network loads.

AWLC4030 (5)

This product has been tested on the following operating systems: SUSE Linux and has a average rating of 5

The last rating (5) has been submitted on 2006-04-15 12:15:41 by Juggler9 running SUSE Linux:
Uses the Atheros chipset and works with the native drivers out of the box. Version II of the card seems to be just an update and slight physical change. It worked with the native drivers out of the box as well.